Fluoropolymer coating systems
The NC-400 nano coating dipping machine is an entry level dip coating system designed for processing ultra-thin nano films such as fluoropolymer coatings.
The fluoropolymer coatings are normally blended with high cost fluorinated solvents for safety, reduction in transport costs and the environment. However, these solvents are highly volatile and can be lost from the system.
The nano coat system prevents these significant losses and allow coating of low and medium volume products in a safe, cost-effective way.
NC 400 nano coat system
The NC-400 Nano Coating dipping machine is an entry level dip coating system designed for processing fluoropolymers nano coatings with high cost fluorinated solvents and allow coating of low and medium volume products in a safe, cost-effective way.
The NC-400 dipping machine has the following features:
- Dip tank and basket system. A dipping tank and basket system for easy submersion of the product for conformal coating.
- Refrigerated system. A refrigerated sump for control and capture of the nano coating and the fluorinated solvents.
- Filtration. Integrated pumping and filter system for control of the quality of the nano coating.
- Unique refrigeration. Unique solid state refrigeration system to reduce evaporation losses.
- Built in redundancy. The solid state system tolerates failure of part of the cooling array and can continue working, saving both lost production time and expensive coating materials.
- Minimal losses. Built in dual cooling coils in the hold zone above the sump to further minimise losses due to the normal evaporation of the carrier solvent as the coated objects dry outside the machine.
- Manual or automated dipping. The dipping operation can be completed manually by the operator or optional automated dipping.
- Full compatibility. The NC-400 works with almost all current fluoro-Polymer coating materials and fluorinated solvents from a variety of manufacturers.
- Height: 1075 mm (on braked castors).
- Width: 1100 mm
- Depth: 750mm
- Weight: 228 kg excluding coating fluid.
Typical Tank Dimensions
- Work basket size: 400mm L x 250mm W x 200mm H.
- Tank size to top of liquid level: 500mm L x 350mm W x 225mm H
- Tank size overall: 500mm L x 350mm W x 800mm H
- Tank capacity: Approximately 40 litres
- Minimum liquid required to charge the machine including tank, filters, pipework: Approximately 58 litres
- Top up tank capacity (if fitted as an option): 10 litres
- Pump for recirculation: magnetically coupled stainless impellor type with EPDM seals and a pumping
- Capacity of 3 – 3.5 litres per minute at 15 deg. C.
- Filters: Three stage system with progressive path through 5 um, 1 um and 0.1 um particle filtration.
- Filter type: low pressure, stainless steel and alloy body with disposable filter cartridge.
- Water separation by dual system: condensing coil collection channel with direct drain off to water collection container 5 litres, plus tank inline separator with manual drain to the same 5 litre container.
Condensing and Cooling
- Cooling Circuits: 3 circuits fitted.
- Circuit 1: Cool the tank fluid (this is the primary vapour control method)
- Circuits 2: Tank cooling coils above the dwell zone
- Circuits 3: Tank cooling coils as additional freeboard coil fitted just under the access lid.
- Cooling system: Solid state Peltier multi-stage cascade type system with a combined cooling capacity of 3.12 Kw/ hour – 10645 BTU’s/ hour at full load. Estimated average hourly cooling load typically @ 1.3 Kw/ hour – 4435 BTU’s/ hour depending on ambient temperature and the bath loading.
- System is an aluminium structural extrusion machine construction system for the framework
- Removable side and end panels constructed from 1.2mm 304L stainless steel.
- Top cover and tank from 1.5mm 316L stainless steel.
- All pipework, baffles and filter housings are 304 or 316 stainless steel.
- Standard 220/230 50/60 Hz VAC.
All data subject is modification at anytime up to order.
Why select a nano conformal coating?
The nano coatings do a different job to the traditional liquid conformal coatings.
What they do is effectively change the surface energy of the substrate they are applied to.
This change in surface energy makes it harder for liquids like water and oils to wet the surface and cause corrosion etc.
Click why select a nano coating to find out more….
- What is a fluoropolymer coating?
- Why are the fluoropolymer nano coatings the lowest cost conformal coatings?
- Why select a nano conformal coating?
- How is a nano conformal coating applied?
- Can the nano conformal coating replace a traditional conformal coating?
- Where are nano coatings being used?
- How much does the nano coating process cost?
- Why are fluoropolymer coatings used?
- What sectors are fluoropolymers being used?
- What are the five key differences between a fluoropolymer coating and a conformal coating?
Interested in our nano coating system or range of nano conformal coatings?
Contact us now to discuss what we can offer you.
Give us a call at (+91) 40 65 897 899 or email your inquiries at firstname.lastname@example.org.